DODGERS vs. FLASHERS

The big difference between dodgers and flashers is the way they run through the water when being trolled. A dodger has a side-to-side swaying action while a flasher develops full 360° rotations. This provides you with two completely different types of attractors, each giving off specific flash and vibration patterns.

Flashers and dodgers impart an erratic, darting action to trailing lures and produce fish-attracting flash and sound. Plugs, spoons, flies and squids all can be used with a dodger, which transfers a crippled baitfish action to these lures. Flies and squids are best used behind an Abe 'n Al® rotating flasher because they have no action of their own in the water and the flasher will give them a lifelike, erratic natural baitfish action.

For dodgers, the correct fish-attracting speed and action is achieved when the attractor has a side-to-side swaying motion. With your boat moving "dead slow", place a rigged dodger-and-lure setup in the water (see illustration) and slowly increase your speed until the dodger has developed the proper action. This is your optimum trolling speed.

Optimum rotating flasher speed, on the other hand, is obtained when the attractor is working in regular full 360° rotations. With your boat in motion, place a rigged flasher-and-lure setup in the water (see illustration) and increase your speed until the flasher develops these regular, full revolutions. Note: Flashers generally work better at slightly faster speeds than dodgers.

DODGER RIGGING

Shown in the following diagrams are various ways to rig a dodger for trolling.

*******************

Remember that the correct fish-attracting speed for a rotating flasher occurs when it is being pulled through the water just fast enough to make complete 360° regular rotations. This will result in a steady throb-throb-pause, throb-throb-pause action at your rod tip.

When using up to six ounces of weight, keel-type sinkers are adequate, but when more weight is required, it is suggested that you use an Abe 'n Al® 3-way swivel and round lead ball as it will maintain maximum flasher-to-lure transferred action and minimize the possibility of tangles and line twist.

The most popular color finishes for dodgers and flashers are Chrome, Chrome/Silver Prism-Lite® and Fire. Hammered Chrome flashers and dodgers, however, are being used more and more as they disperse light in all directions as do the Prism-Lite® finishes. In the Great Lakes, Fire, Chartreuse, Watermelon and Kelly Green models are increasingly popular and in the Northwest, White and 50/50 Brass/Chrome are very productive.

These are only a few of the colors available for the Abe 'n Al®, Alaskan Eagle and Jensen Dodger models from Luhr Jensen. The smaller of the Jensen Dodgers, the #040 (4" x 1 3/8") and #030 (4 5/8" x 1 1/2") are generally used for trout or kokanee fishing while the larger sizes are preferred for salmon and other big fish. The size of dodger you select should be based somewhat on the size of the trailing lure you wish to use. For instance, a large J-Plug® might overpower the action of a small #030 dodger so a larger one would be used such as the #007, #000 or even the large #001. If you're going to fish deep, larger dodgers will provide more flash and stronger vibration which can draw fish from farther away. In clear or shallow water conditions, a smaller dodger might be used.

The Abe 'n Al® flashers are available in five sizes ranging from the smallest #006 (6" x 1") to the largest #002 (13 1/2" x 2 5/8") with the #006 best used for trout on light gear and the larger ones for salmon, other big fish and deep trolling situations. The largest (#002) should be used for deep, heavy trolling conditions.

FISH PREFERENCES

Following are some helpful tips relating to particular fish species. Although there are no hard and fast rules when it comes to fishing, there are many regularly observed fish habits and preferences that will give you a definite edge if you're familiar with them.

COHO: When the temperature is right in fresh water and during most of their life in salt water, coho salmon are surface or shallow water oriented. They generally can be found at depths less than 50 feet and are a fast fish when compared with Chinook or lake trout. They especially like the fast action of a dodger (#007 or #000 are popular) in combination with flies and squids. The rule of thumb for a fly or squid lure behind a dodger is to use a leader of about 1 1/2 times the length of the dodger. In the Great Lakes, some anglers have been successful with leaders as short as 6". These impart incredibly fast action to the trailing lure. The principle here is to use a longer leader for slower action and a shorter for faster action. Since it is easier to shorten a leader then change to a longer one, start with 12 to 18 inches and then shorten it until you get the desired lure action. A super-fast action fly used in combination with a dodger is deadly for coho. Some effective spoons to try are the Kokanee King, Krocodile, #31 Alpena Diamond and the Coyote.

CHINOOK: When compared with coho, Chinook salmon prefer deeper water and larger, slower-action lures and attractors. They often shy away from unnatural movements in the water, so longer leaders are generally used. The Abe 'n Al® flasher is a proven attractor for deep water Chinook and its lazy, rotating action is often exactly what turns them on. When used with flies or squids, leader lengths between the lure and flasher should be 1 1/2 to 2 1/2 times the flasher length or between 18" and 30". The longer the leader, the slower and more deliberate the action imparted to the trailing lure.

Chinook and coho in most of the Great Lakes grow to trophy size feeding primarily on forage fish. Consequently, the most productive baits for trolling with flashers there are whole herring, plug-cut herring, herring strips and plastic squids baited with a herring strip. Rigged correctly a whole herring will roll in a slight arc at a rate of 1 to 2 revolutions per second. The Herring Aid® provides one of the simplest, most effective ways to rig whole herring to produce an effective rolling action at slow trolling speeds. The #2 size works best in the Great Lakes where alewives average 6 to 7 inches.

SALT vs. FRESH WATER

When trolling in salt water, you'll find the optimum feeding and fish-catching times during low light periods and from an hour before, during and an hour after a tide change. Fish areas where birds are working on baitfish schools and troll the clean sides of rips.

In fresh water, such as in the Great Lakes, the time of day isn't nearly as critical as locating the depth of the preferred temperature level for the fish species you're seeking . . . the thermocline. Lakes stratify into three separate layers of water in the spring and stay that way until cold weather. The middle layer, where there is a larger concentration of dissolved oxygen, baitfish and therefore predator fish, is called the thermocline and can usually be found from 10 to 80 feet down. This is a temperature layer as well as an oxygen-saturated layer and fish will relate to it as both a comfort zone and one where their body metabolism functions the most efficiently. These fish will be suspended and feeding on alewives, smelt or other forage fish.

The peak feeding and optimum temperature for coho and Chinook is 54° with an active range from 44° to 58°. For lake trout, the peak feeding and optimum temperature is 51° with activity from 43° to 53°. Fish will rarely venture out of these zones, once stratification has taken place, except to catch a meal and then will quickly return to it. One thing to remember when fishing the thermocline is that its depth can change from day to day because of wind and/or wave action. It may be several feet deeper or shallower from one day to the next so you'll have to relocate it each time you go out.

SHARP HOOKS PAY OFF!

One of the easiest things you can do to improve your fishing success is to maintain super-sharp hooks on your lures at all times. A fine-toothed file such as Luhr Jensen's Sharp Hook File is the absolute best hook sharpening tool available. Hold the file parallel to the hook point and withgentle, one-way strokes, remove a small amount of metal on at least two sides to obtain a sticky-sharp point with a knife-like cutting edge.

DEPTH SOUNDERS

There probably is no one accessory more important as a good quality depth sounder such as those made by Bottomline, for producing optimum trolling results. A flasher unit will pinpoint the depth at which fish are suspended, thereby allowing you to get your lure to the right depth with no guesswork. These units also enable you to spot underwater contour changes such as ledges, dropoffs, islands and other structure that fish relate to that otherwise can't be found with any consistency.

A paper chart recording depth sounder will provide you with the previous advantages plus give you a permanent record to refer back to. You can chart specific areas, bottom contours and the like and actually see your lure and fish that are close by. Schools of baitfish (and sometimes the thermocline layer) which are only momentary blips on a flasher unit can be seen and followed with a chart recorder. A depth sounder will allow you to zero in on the right fish-holding depth at the right time and over the right structure. It's an investment that will pay for itself in both fish and fishing enjoyment.

ADDITIONAL TIPS

Here are several tips to file away in your memory bank.

• Use a quality, premium monofilament line, such as Trilene XT which has high knot strength, low visibility in the water, thin diameter in relation to strength and great abrasion resistance.

• Know the area you plan to fish BEFORE going out by talking with local anglers, sporting goods personnel, studying charts and maps and reading local fishing publications.

• Try to match the size and color of the baitfish in the water you'll be fishing.

• Save a lot of valuable fishing time by pre-rigging and pre-tying all of your gear at home. Leaders can be pre-tied with snaps or snap swivels and all you'll have to do to change lures, attractors or weights is to undo and refasten a snap or two.

Those are some of the tips, techniques and riggings which will help you become a more successful troller with dodgers and/or flashers.

Coupled with the effectiveness of trolling technique, flashers and dodgers are deadly fish attractors in both fresh and salt water. They are rigged in the line between the lure and downrigger release, diver or lead to provide attraction and impart erratic action to trailing lures such as plugs, spoons, flies or plastic squids.

Trolling with dodgers or flashers produces excellent results because you can cover a large amount of water in a very short time, thereby locating concentrations of fish with the least amount of time and effort expended. The flash and sound of these attractors draws fish from considerable distances, allowing you to cover a wider swath of water effectively with each pass . . . a big advantage when prospecting unknown waters or when fish are scattered.

Successful trolling requires a knowledge of fish and their habits, proper equipment, the ability to troll various depths and a willingness to experiment with different attractors, lures and color patterns.

Tackle for trolling dodgers or flashers consists of a stout 7- to 9-ft. trolling rod, free-spool-type star drag reel filled with 20- to 30-lb. test premium monofilament line and a downrigger, diver or selection of lead weights to get your offering down into fish territory.

HOME